이 설정들은 시작 옵션과 그래픽 옵션을 조절합니다.
Auto-Start Voice Doctor: starts voice doctor automatically
on startup if voice learning is needed.
이 페이지는 고급 음향 설정을 조작할 수 있도록 해 드립니다.
Sound Threshold: This
determines how loud sound needs to be before being Morphed. With more background noise, this level may need to be
raised higher.
Leaving this setting higher ensure that background noise isn't being morphed. If this level is too high it may result in the voice not being
morphed properly. The default is Low.
Sound Quality: This determines how
much processing is dedicated to morphing your voice. The higher the
slider, the more CPU time will be consumed by MorphVOX and the better sounding
the morphing will be. The default is the 2nd position.
Voice Pickup: This
adjust how sensitive MorphVOX is in picking
up your voice. Slide it to right if you are getting yoddling or choppiness in your
Morphing. Slide it ot the left to increase the crispness or cleaness of the speech.
Listen Delay: This slider
determines the delay between when you speak and when you hear your voice. The
default is the first position.
Background Cancellation: This works in conjunction with "Sound
Threshold" to completely eliminate background sound or noise. Turn this off
if you find your voice is choppy.
Hum Reduction (50 or 60 Hz): This reduces the noise from any electrical
source that produces a 50 or 60 Hz Hum.
Full-Spectrum Sound: This maintains full frequency (20-20,000hz)
sound during morphing to produce a better quality sound. Turning this feature
on does use more CPU however.
에코 캔슬링: MorphVOX가 듣기 모드로 설정되어 있을 때 에코를 감소/제거 하기 위해 이 항목을 체크하세요. (스스로의 말 소리를 들을 수 있도록 말이죠). 기본적으로는 체크가 해제되어 있습니다.
이 페이지는 MorphVOX에서 사용되는 마이크와 스피커를 수동으로 설정하도록 해 드립니다.
Microphone: This drop-down will list
all the valid microphone input drivers on your machine. Choose the device
that is attached to the microphone you will use for input into MorphVOX.
Playback: This is a list
of devices used to play audio. Choose the one you would like MorphVOX to use for echo/Listen and auditioning sound effects. Usually this should be
left as "Primary Sound Driver".
Playback Volume: Allows you to access the Windows playback volume
control.
Use Legacy Drivers: Use an older way of capturing and playing back audio.
This should only be used if you are having audio glitching problems, or you are using echo cancellation.
ScriptVOX Integration: Allows remote control of MorphVOX voices
from ScriptVOX Studio when this control is checked.
Microphone Volume: Allows you to access the Windows recording/microphone volume control.
이 페이지는 MorphVOX에서 사용되는 다양한 커맨드에 단축키를 지정하도록 해 드립니다.
특정 단축키를 눌렀을 때에만 목소리를 변신하고 싶으시다면 체크하십시오, 게임 실행을 위해 CPU 사용을 최적화할 수 있고, 언제 목소리가 들릴 것인지 제어할 수 있습니다. "설정" 버튼을 눌러 단축키(혹은 단축키의 조합)을 설정하십시오.여기를 클릭하시면 토글 키 대화창을 설명해 드립니다.
당신의 정상 목소리와 현재 커스텀 목소리 간 토글하려면 이를 체크하십시오. "설정" 버튼을 눌러 단축키(혹은 단축키의 조합)을 설정하십시오.여기를 클릭하시면 토글 키 대화창을 설명해 드립니다.
Check this when you want to mute your microphone. Set the activation key (or combination of keys) by using the "Set" button.여기를 클릭하시면 토글 키 대화창을 설명해 드립니다.
"목소리 단축키" 대화창을 실행하여 목소리에 특정 단축키를 설정하려면 이 버튼을 사용하세요.
더 많은 정보는 여기를 클릭하십시오."효과음 단축키" 대화창을 실행하여 효과음에 특정 단축키를 설정하려면 이 버튼을 사용하세요.
더 많은 정보는 여기를 클릭하십시오.
The Voice Toggle Keydialog shown
above sets the key(s) used to activate the command. To set your toggle
key, press the keys you would like to hold down when activating.
Click OK with the mouse when the keys for toggling have been
set.
주의:: 쉬프트 키를 계속 누르고 있지 않으면, 어떤 알파벳이든 상자에는 '대문자'로 표시되었지만 '소문자'로 등록될 것입니다. 명령에 배정할 키 조합을 정확하게 입력하는 것이 중요합니다.